Showing posts with label gift card. Show all posts
Showing posts with label gift card. Show all posts

Monday

Graduation Shutter Card

Ggggoooo Cougars! (tee hee hee!) Hello everyone... it sure has been a busy last couple of weeks... last minute school projects & kids getting out of school, 2 of my kids with birthdays and some with their friends w/birthdays, graduations, dad having surgery (he's recovering nicely, thank goodness)... not to mention WORK thrown in there, too! I'm glad that things seem to be slowing down (and I hope it stays that way!)...

OK, now let's talk about this card. I made this graduation card for my nephew who completed his high school last Thursday! WTG, Blaine!!! This style of card is called "Tri-Shutter", and it was a Splitcoast Technique challenge several weeks ago, although specific directions can be found here on Bonnie's blog. The various individual stamps come from a large variety of retired stamp sets - it's really hard for me to let any go because they come in handy sooner or later... OK, truth be told, I love being surrounded by all my stuff in my craft room! (wails... I can't help it!)

As you might guess, Blaine's high school colors are purple, teal and white. I made my card base with a "basic gray" speckled paper, and went from there. I used a computer/printer for the school name, class year and Thoreau quote, and the cougar image was a photo found on the internet that was cropped and printed black and white. All these things were measured out to fit the individual sections of the card and matted in the school colors. See the section where "congratulations" was heat embossed with white embossing powder? That area was large enough to easily fit my VISA giftcard, and was attached there with temporary 2-sided tape. I loved that it fit! (Yes, I am easily amused by the little things in life!)
Before I forget, you can click the picture and it'll refresh with a larger version so that you can see the details alittle better - as you can imagine, this one was alittle tricky to photograph for you, being the amateur photographer that I am! :)

Here's the card closed, and it fit into a standard A2 envelope. The mortarboard for the graduation cap was stamped again, cut out and popped with a dimensional. The "hip hip hooray" was punched with a 1/2 inch punch and popped up too. The card was alittle bulky due to the thick buttons, hardware with ribbons, and many brads that I added, so it did take extra postage to mail.

I'm glad to be posting again! Stampin' Up demonstrators were able to do some pre-ordering of selected items in preparation for the new catalog to be released July 1st. I'm looking forward to receiving my shipment later in the week - new goodies are always inspirational, and I can't wait to share! If you'd like to pre-order a catalog for just $5, let me know by filling out the form HERE. Have a great day!

Stamps - Carte Postale, Circle of Friendship, Greeting for All Reasons, Mini Messages, Sketch an Event (all retired stamp sets)
Cardstock - white, taken with teal, elegant eggplant, "basic gray" type cardstock for base (I think it comes from "cottage collection" by Keeping Memories Alive)
Inks - Versamark, Elegant Eggplant, Taken with Teal, Basic Gray
Accessories - craft knife, ruler, cutting mat, stylus, various circle punches, sponge dauber, silver brads, heatgun, white embossing powder, hodgepodge hardware, matpack and paper piercer, dimensional popdots, non-SU 1/8th inch ribbon in white, blue, purple

Floral Crimped Envelope & Pocket Card


This is such a simple technique for those of you wanting to make a card, or present a gift card with pizazz, for someone really special! So often, we don't seem to really embellish the envelope as much as the beautiful card we've created, and this project really fills that void... and how!!! This technique was featured a couple weeks ago on Splitcoast's Technique challenge, and I encourage you to click on the link to learn how it's done so that you can give it a try!

I used a couple different stamp sets for this, Botanical Blooms and Heartfelt Thanks. The envelope was stamped first with the leaves from Botanical Blooms in Old Olive and Kiwi Kiss inks, and I lightly sponged around the perimeter with Kiwi Kiss. The envelope was crimped, then the flowers from Botanical Blooms were stamped using a Stamp-A-Ma-Jig on a separate piece of Whisper White cardstock and cut out. They are adhered to the envelope with dimensional popdots, along with several sprays of leaves diecut using the Little Leaves sizzlet/Big Shot. The envelope topper is sponged lightly all around, with a strip of Bella Rose DSP layered a couple times, and a ribbon knot attached around the strip before being glued to the topper. The pocket card is stamped with a flower from Heartfelt Thanks on Whisper White cardstock (again using a Stamp-A-Ma-Jig, every stamper should have one of these in their arsenal!). This panel was layered a couple times, then I used my Eyelet Border edge punch along the bottom. I sewed along the edges of one panel with a zig-zag stitch to add a little bit of oomph. Finally, I added a stamped tab using the Round Tab punch to make it easier on the recipient to remove the pocket card from the envelope.

I hope you enjoy my little project for today... I would love to hear what you think! Again, I encourage you to try this technique for yourself - it really is a wonderful way to present someone with a beautiful handmade card or giftcard. See you tomorrow... I've got another fun project to show you that I'm finishing up today.... ta ta for now!

Stamps: Botanical Blooms, Heartfelt Thanks
Paper: Kiwi Kiss, Pink Pirouette, Riding Hood Red, white, Bella Rose DSP
Ink: Kiwi Kiss, Old Olive, Riding Hood Red
Accessories: Envelope, Kiwi Kiss ribbon, crimper, sponge, Big Shot, Little Leaves sizzlet, dimensionals, brads, sewing machine, Stamp-A-Ma-Jig, SU punches - Round Tab, Eyelet Border

Sunday

Winter Post Gift Card


Hello again! As promised, here is another gift card holder using the Big Shot Top Note die to create my pocket that holds the gift card on the inside (see picture below). I used the very edge of the Top Note die to cut away and make the fancy scallop to create the pocket that the gift card slides into...

To make this, I cut my Night of Navy cardstock in half lengthwise to give me a sheet 4 1/4 x 11 inches. Measuring from one short side only, I scored at 4 3/4, 5 1/2 and 6 1/4 inches. Fold the card so that you create the flap on the inside - see pictures below:



Use Mono-Multi glue on the outside edges only to secure the flap together (see below). You don't want to glue the entire flap together because you won't be able to make your pocket that your gift card slides into! :)




Once the glue sets for about a minute or so (this glue is amazing.... I love it!), you'll be able to run the card through the Big Shot using the Top Note die. I put a couple of pieces of tape along the edges of the die to help me line up the flap for cutting (see below). This way, the cut is even all the way down the flap. (Tip to share: You may want to use additional tape to help secure the card/flap to the die to keep it from sliding around while you cut it.)
And Voila! Your pocket has been created....

I have to note here that I did take my scissors and trim the edges of my curve about 1/8 inch on each side because my gift card was just a smidge larger than the pocket cut-out... notice the white lines of the gel pen in the above picture. I drew those in for you so see how much I trimmed. I'm not sure if all gift card sizes are the same, so you may or may not need to do this step.
I decorated the front by stamping/heat-embossing the skaters from my Winter Post set (found in the Fall-Winter Holiday Mini) in black ink and clear embossing powder. I masked the skaters and stamped/heat-embossed the trees from Lovely as a Tree the same way. I used my 3/4 inch circle punch and a post-it note to create my moon mask. Using another post-it note, I protected the snowy ground while I sponged the night sky in Bashful Blue, Bordering Blue and Night of Navy ink. The post-its were removed and I drew in the edge of the lake below the trees. The skaters were watercolored with markers/aquapainter. The ice was sponged in Bashful Blue. Lastly, I heat-embossed the Christmas sentiment from the Curly Label bundle and punched it out with the Curly Label punch. This sentiment was popped up with dimensionals.

I created another one below, but this one is a standard size card using More Mustard as my cardbase and watercolored the ice instead of sponging.

I hope you enjoy today's posting.... I'd love to hear what you think! As always, thanks for visiting, and I hope you had a great weekend!!! See you next time... :)

Saturday

Winter's Coming!



Winter's on the way! Here's a matchbook card utilizing stamps from 4 different Stampin' Up! stamp sets. The trees come from the always adaptable Lovely as a Tree set, along with the cute reindeer from the new Fall-Winter Mini Catalog's Winter Post set. The snowflakes are from the very popular, but now retired Snow Flurries, and the Christmas sentiment is one of four different stamps found in the Curly Label punch bundle. I love mixing different stamp images from Stampin'Up!s sets because so many of them compliment each other in ways that you least expect at times...

Matchbook cards are perfect to use for gift card holders. Cut your 8 1/2 x 11 inch cardstock in half lengthwise to make (2) pieces 4 1/4 x 11 inches. I did this using Pumpkin Pie. Measuring from one 4 1/4 inch side only, score at 1 inch and fold, and from that score line, measure and score at 5 3/8 inches and fold. This gives about a 1/4 inch overlap that will tuck behind the 1 inch pocket flap that was first created. For decorating, I heat-embossed my little Old Olive snowflake panel at the bottom with Versamark and white embossing powder, then glued it to the 1 inch flap. I folded the flap over and added brads to secure my pocket to hold my gift card. For my main image, I stamped the trees in black ink on a block of Whisper White. I used a torn post-it note along the ground to protect it when I sponged the sky in Really Rust, So Saffron and Pumpkin Pie inks. Then using a different post-it note, I covered the sky and sponged the ground in Old Olive ink. The reindeer was stamped on top in black ink using the Stamp-A-Ma-Jig so it would be placed exactly where I wanted it. I stamped/heat-embossed the snowflakes on the top of the panel with Versamark/white embossing powder. Lastly, I took my Versamark pen and drew in the snow and heat-embossed this with white embossing powder (went alittle crazy on this step, but I still like the effect - LOL!). This panel was mounted on Old Olive and a ribbon bow was tied across. After gluing the main panel down to my matchbook, I added the sentiment by stamping in Versamark and heat-embossing in black powder on Pumpkin Pie cardstock. This was punched out with the Curly Label punch, and I glued the lower half of the sentiment only onto the pocket flap.

Thank you for checking in with me today. I hope you like my gift card holder and get a chance to play with matchbook cards and heat embossing soon! I'm posting a different type of gift card holder tomorrow using the Top Note Die/Big Shot, Lovely as a Tree and this wonderfully fun Winter Post set - it has officially become a favorite one for me (ya, ya, ya... along with about 150 other "favorites" - hey, what can I say? SU! stamps ROCK!) :)
Blog Widget by LinkWithin